How to Reduce High Heating and Cooling Bills?

Introduction

How to Reduce High Heating and Cooling Bills

Heating and cooling makes up to a significant amount of your monthly bills. In a home, there are a variety of technologies which are associated with heating and cooling. These include refrigerator unit, HVAC System and air conditioners, water heaters, and thermostats. These technologies expose your family to extra energy bills on regular basis.

Reduce Your Heating and Cooling Bills

It may be impossible to avoid heating and cooling functions at home. This is due to frequent weather changes as well as body health requirements. However, it is possible to reduce your regular heating and cooling bills. This can be enhanced by the following tips:

1) Use of Solar Energy for Heating

Direct sunlight produces up to 90 watts in every square foot. This energy can be used for numerous functions at home. Solar energy is effective in heating water. This saves the electrical energy used for this purpose.
At the same time, you can use solar energy to warm the house, charge electrical appliances, dry grains, meat, vegetables, and distill water. Solar energy can save up to 40% of your energy bills. Thus, you can be able to save your money and spend it for a different purpose.

2) Insulating Your Home

How to Reduce High Heating and Cooling BillsHomes which are located in hot places amounts to higher cooling bills than those located in cooler places. Individuals tend to use air conditioners, refrigerator units, and other cooling units in order to control body and environmental temperature. On the other hand, homes located in cold places amounts to higher heating bills than those located in warmer places.

Materials such as fiberglass, recycled newspapers, and cellulose fiber are commonly used for insulation. These materials are used in reducing or increasing temperature in the house. Also, use of brick is also effective in retaining warmth as well as cool temperatures in the house.

3) Prevent Energy Escape through different Exits

Keep the outside weather free from interfering with the temperature inside the house. Over 10% of energy at home escapes through windows, doors, and other spaces. By closing the doors, windows, and other spaces during cold weathers, you will be able to save energy from loss.

On the other hand, during hot weathers, it is necessary to allow cool air to navigate inside your house. This will lower the temperature in the house. At the same time, it will allow entry of fresh air inside a room. Therefore, energy used for cooling processes will be minimized.

4) Do not Interfere with the Thermostat Functioning

Frequent changing the thermostat setting leads to massive use of energy. You may consider using programmable thermostat. This thermostat functions automatically in responding to temperature changes. Thus, you do not necessarily need to alter its functioning frequently. As a result, this will save you high amount of money used in heating and cooling bills.

5) Conduct Regular Maintenance on your HVAC System

HVAC System is the main heating and cooling system useful in homes. It changes the temperature of a room and the quality of air in it. Old or faulty HVAC System may require higher amount of energy in order to function effectively. Changing the filters, fans, and other parts may help in sustaining the efficiency of this system. Also, you may consider changing an old HVAC System in order to improve the performance as well as reduce bills.

Conclusion

It takes less effort to control the energy spent in heating and cooling purposes at home. Keeping your house air tight and well insulated against cold or excessive heat may work perfectly in reducing these energy bills. Also, the use of renewable energy sources may help in cutting down the energy cost.

How to Operate Your Main Water Shut-Off Valve?

Introduction

How to Operate Your Main Water Shut-Off ValveLearning how to operate your main water shut-off valve may prove to be pretty useful to you in future. The process of learning how to operate a water shut-off valve starts with knowing where the valve is located. Mostly, contractors fix these valves in house corners or inside the walls of a house.

Know About Water Shut-off Valve

The planning arrangement in your house will help to locate the position of your shut-off valve. However, its location mostly depends on the model and design as well as the property line of your house. These include:

a) Meter Location

Some homes have their water meters located inside, outside, or alongside the property line. Water meter is always near a shut-off valve.

b) Home Construction Design

This includes designs such as crawl spaces, basements, and also slab-on-grade.

c) Presence of Water Shut-off Handles

How to Operate Your Main Water Shut-Off ValveThese include round wheel handles and lever handles. Presence of such handles in any location inside your house may indicate the location of a water shut-off valve.

Knowledge on various parts in your house will help you in locating and operating your water shut-off valve. The valve may be located in the foundation valve, near water heater, or under the kitchen sink.

How Should Your Choose the Valve to Operate?

Where a house has fire sprinkler systems, you should be careful not to while selecting the right valve for your home. In such an incidence, be sure to select the home water valve. Leave the fire sprinkler system untouched. Such homes have double shut-off valves. However, homes with no fire sprinkler have single water shut-off. This is the valve that you should target working on.

How to Close the Main Valve?

How to Operate Your Main Water Shut-Off ValveUse the round wheel handle to close the valve. Using the round wheel handle, turn the valve around in the clockwise manner. Closing the valve may take two full revolutions using the handle. Ensure that the level handle valves stop at a quarter turn and not parallel with the pipe.

Open both hot and cold faucets at the sink or tub. Ensure that you relieve pressure and check the shut-down on the sprout. Then, open the faucets fully in order to drain the collected water. When draining this water, be sure to turn-off the energy source in order to prevent energy loss as well as risks of electrical shock.

How to Open the Main Valve?

While opening the main valve, you need to close the faucets. However, you should not close the faucets for the sink or tub on the highest level. Use the handle valves to open this point. Turn the round wheel handle until it reaches a half revolution. Also, ensure that it is leveling at a half of a quarter turn for the lever handle.

While water continues to flow, proceed to turn off the highest open faucet. Observe the water pressure equalization through listening. After the water noise ends, open the main valve. Release the air that was held in the faucet and proceed to all other faucets until they are over. Throughout this process, ensure that you are safe from any risks by turning-off the power source.

Conclusion

Water system can spoil any time of the day or night. Without knowledge on how to operate water shut-off valve you may not be able to carry on water system repairs effectively. Therefore, learning how to operate your main water shut-off valve is an essential skill that may help you in future.

How to Choose the Best Gun Safe?

Introduction

How to Choose the Best Gun SafeProper gun storage is a moral and, at times, a legal requirement. It is your duty to safeguard your gun from being accessed to and handled by unintended persons. These include children, people with unsound mind, and also burglars. Guns are also susceptible to spreading fires through explosion. Therefore, storing a gun properly in a safe is essential.

Choose the Best Gun Safe

Guns are of different varieties. Thus, gun safes are also different. However, the previously used gun cabinets have been deemed as ineffective in safeguarding a gun from access by other people. Therefore, you should be sure to choose a better and a more suitable safe for your gun, read more about choosing the best gun safe at this blog.

1) Check the Biometric Lock System of the Gun Safe

How to Choose the Best Gun SafeBiometric security system works best in ensuring safety and limited access. Nowadays, technology has made it pretty difficult to duplicate biometric security systems. Such a security system is perfect for your gun safe. It may be expensive but it provides maximum security for your gun especially in your absence.

2) Choose a Gun Safe with all Sorts of Proof

The safe should be able to keep the gun free from water, fire, and air. Consider the fire rating of a gun safe prior to buying it. A good gun safe should have the ability to resist fire. This is essential during fire outbreaks as it will keep the gun safe from burning and exploding. Explosion may intensify the situation too.

Some individuals usually store other items in the gun safe too. These include: jewelry, title deed, certificates, and even cash. Thus, a water, air, and fire proof gun safe may translate into safety to a lot of items in your house.

3) Check its Compatibility and Compactness

A good gun safe should be efficient in fitting to the space meant for it. Thus, a big safe always becomes unsuitable. Sometimes, you may consider changing the safe in order to increase its security. Thus, a relatively small and a perfectly compact gun safe is always a better option.

You may also look for a gun safe that takes on the look and the color of your wall, floor, or shelf. Compatibility of a gun safe with its fitting location helps in preventing direct view by burglars or other unintended persons.

4) Go for a Gun Safe with an Alarm or Notification App

How to Choose the Best Gun SafeGuns are always targeted by thieves and burglars. They eventually make their tasks in robbery and burglary easier. Thieves or burglars can do anything in order to trace their way to your safe for the gun. Therefore, having an alarm fitted in your safe will notify you during such a time. In the present times, gun safes are being enhanced with smartphone apps which notify the user in case the safe is opened.

Conclusion

Mostly, thieves and burglars consider cutting the gun safe and proceeding to dismantle it later. Thus, you may consider fitting the safe inside the wall or under the floors. You may use concrete in order to make it firmly held. Fitting your gun safe in your wardrobe’s or cupboard’s shelf may predispose it to easier access and removal.